REAL COLOR AND MONOCHROME 16 LCD PROJECTION PANELS
C. Special Guidelines for IBM
and Compatibles
C.1 IBM Computers with Two Display Cards
If your computer has both a color and monochrome display, you may need to turn on the color card. Because your computer will only display on one monitor at a time, you need to ensure that the color display is on when using the Projection Panel.
You can do this in a variety of ways. Some computers require special commands other than
See Section C.2 for instructions on how to setup a color or monochrome display.
For most IBM and IBM compatibles:
1.Follow the instructions for setting up the Projection Panel.
2.Insert your
3.When the DOS prompt appears, type MODE CO80
(CO for color, the number 80 for 80 columns).
4.The color card should be activated.
If you have a monochrome monitor and want to switch back, at the DOS prompt, type:
MODE MONO
The Projection Panel will go off and your monochrome monitor will come on.
36