Black Box AC401A, AC400A manual General Guidelines

Page 8

2.3 General Guidelines

Follow these guidelines when you use the Projection Panel.

Be sure the Projection Panel is on whenever the overhead projector is turned on.

CAUTION

If the Projection Panel is not on when it is on top of an operating overhead pro- jector, the Panel could sustain damage.

Do not use the Projection Panel for extended periods of time on an overhead projector known for discoloring or melting standard transparencies.

When you use the Panel with a high-wattage projector or if you notice extreme discoloration of the Panel, periodically remove the Panel from the overhead projector to allow it to cool.

The bottom of the Panel can become very hot to the touch after use. Be careful to let the Panel cool before lifting it.

Do not block the Projection Panel fan or free air movement under and around the Panel. Air flows from back to front.

Turn the overhead projector off and unplug the Projection Panel when not in use.

CHAPTER 2: Introduction

Handle the Projection Panel as you would anything made of glass. Be especially careful not to drop it.

You can easily clean the Projection Panel with standard non-abrasive glass cleaner. Apply the cleaner to the cleaning cloth and then wipe the glass surface lightly. Do not use excessive amounts of liquid or pressure on the top or bottom optical panels.

Avoid scratching the Projection Panel surface with sharp metal objects. The top surface is made of glass or a scratch-resistant hardened polymer. If you need to clean the surface, use normal glass-cleaner solution. Do not use abrasive cleaners, solvents, or other harsh chemicals.

Avoid leaving the Projection Panel in direct sunlight or extreme cold for extended periods of time.

7

Image 8
Contents September Real Color and Monochrome 16 LCD Projection Panels Real Color and Monochrome 16 LCD Projection Panels Contents Specifications Resolution 640 xIntroduction DescriptionShipping Container Contents General Guidelines Installation Setup InstructionsInstallation Connecting the Projection Panel to Your Computer Computer Cable Desktop Computer with a Y-Cable Typical Laptop Installation Macintosh Series Computer Adjusting the Projection Panel OperationNON-SHIFT Shift Keys Non-Shift Control Buttons TintContrast Sync+Position Menu PositionReverse Shift-Activated Control Button FunctionsClear Holding Down Shift and Pushing a Command Button Sync- shift sync+Reset shift clear PaletteMenu Tint Shift PositionUser Menu Adjusting a Menu Option Track2 EGA 16. Tracking 17. Rear Projection Maintenance and Troubleshooting Cleaning the Projection Panel FilterTroubleshooting Guide Maintenance and TroubleshootingReal Color and Monochrome 16 LCD Projection Panels Problem Image is out of focus Working With Colors AC400A only ConvergenceInput Pin Signal Description Output Pin Interface RequirementsPower Connector Polarity Screen AreaComputer Monitor Projection Panel Screen Area Special Guidelines for IBM Compatibles IBM Computers with Two Display CardsInstructions for Activating Portables and Laptops Real Color and Monchrome 16 LCD Projection Panels Index NumbersCopyright 1993. Black Box Corporation. All rights reserved