Black Box AC400A, AC401A manual Menu, Tint Shift Position

Page 23

REAL COLOR AND MONOCHROME 16 LCD PROJECTION PANELS

 

level

 

menu

 

tint

 

shift

shift

position

 

 

 

 

Fig. 4-14. Menu.

Fig. 4-13. Level Up and Level

Down.

4.3.5MENU

Pressing the Menu control displays the User Menu, which allows you to adjust the initial color balance and tracking, change the text mode and language, and flip the projection image. The User Menu also provides information about the video input. After you display the User Menu, use the Position (< >) control buttons to move within and between menu options, and the Position ( ^ or v ) to change an option.

For information about the User Menu, see the section later in this chapter.

Shift-Menu(either button) moves you in or out of menu mode.

4.4Using the Control Buttons to Make Adjustments

Now that you have reviewed the functions of each of the control buttons, here is the order in which you use them to achieve the best possible projected image.

1.Press the Tint or Contrast buttons up or down to change the color of your image or text for the best viewing. Tint or contrast is easiest to adjust with an image that contains large areas of different color or greyscale.

2.Move the image on the screen with the Position Up, Down, Left, and Right buttons until it is centered.

3.Focus the overhead projector until the image is crisp and clear.

22

Image 23
Contents September Real Color and Monochrome 16 LCD Projection Panels Real Color and Monochrome 16 LCD Projection Panels Contents Resolution 640 x SpecificationsDescription IntroductionShipping Container Contents General Guidelines Setup Instructions InstallationInstallation Connecting the Projection Panel to Your Computer Computer Cable Desktop Computer with a Y-Cable Typical Laptop Installation Macintosh Series Computer Operation Adjusting the Projection PanelNON-SHIFT Shift Keys Sync+ Non-Shift Control ButtonsTint ContrastMenu Position PositionReverse Shift-Activated Control Button FunctionsClear Sync- shift sync+ Holding Down Shift and Pushing a Command ButtonPalette Reset shift clearTint Shift Position MenuUser Menu Track Adjusting a Menu Option2 EGA 16. Tracking 17. Rear Projection Cleaning the Projection Panel Filter Maintenance and TroubleshootingMaintenance and Troubleshooting Troubleshooting GuideReal Color and Monochrome 16 LCD Projection Panels Problem Image is out of focus Convergence Working With Colors AC400A onlyInterface Requirements Input Pin Signal Description Output PinScreen Area Power Connector PolarityComputer Monitor Projection Panel Screen Area IBM Computers with Two Display Cards Special Guidelines for IBM CompatiblesInstructions for Activating Portables and Laptops Real Color and Monchrome 16 LCD Projection Panels Numbers IndexCopyright 1993. Black Box Corporation. All rights reserved