BOXLIGHT 12SF manual T t i n g O j e c t o r

S e t t i n g u p t h e P r o j e c t o r

The image exits the projector at a given angle. This image offset is 125.5% when the projector is in 16:9 mode (the default mode). This means that if you have an image 10’ high, the bottom of the image will be 2.55’ above the center of the lens.

The value is 113.7% for 4:3 mode.

10’ high image

bottom of image 2.55’ above lens

lens center

FIGURE 6

Projection angle in 16:9 mode

3Make sure the projector is unplugged and your equipment is

turned off.

WARNING: Do not place the projector on a tablecloth or other soft covering that may block the vents. Do not use a non-Studio Experience ceiling mount. In the unlikely event of the bulb rupturing, thoroughly clean the area in front of the projector and discard any edible items placed in that area.

6