Audiovox HD588 manual Cable Run Length, Repeater Indicators

Page 6

Powered HDMI Repeater

Repeater Indicators

Status

Solution

On Off

On On

Off On

Off Off

The repeater is working normally.

No cable on Display side No power on Display side Cable length too long

Wrong signal direction

No cable on Source side

No power on either side

No cable on either side

—

1.Reconnect the display device

2.Power on the display device

3.Use shorter cables

1.Reverse cable positions on repeater

2.Reconnect the signal source

1.Power on both devices

2.Reconnect both devices

Cable Run Length

How far you can run HDMI cable using this repeater is dependent on the quality of the cable being used. Standard HDMI cables built with 30-28 gauge conductors will limit the usable length. The attached components will also affect the length of the cable run.

When using a well-constructed HDMI cable with better shielding and larger gauge sizes (such as many AR products), you will be able to transmit the HDMI signal longer distances without performance degradation. This length will also vary depending on the quality of the high definition component being used.

With better HDMI cables, the typical length improvement will be approximately:

•1080p – 85 feet

•720p – 118 feet

When installing this device, it is recommended that the cable length used on the display side be 85% shorter than the cable length used on the source side.

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents
HD588 Powered Hdmi Repeater Installation Guide Important information Important information Key features What’s in the boxSpecifications Connecting the repeater Smart LED TechnologyRepeater Indicators Cable Run LengthMonth Limited Warranty
Top Page Image Contents