34What to do if…

Malfunction

 

Possible cause

Remedy

 

 

 

 

 

 

Water tap is blocked with

Check the water tap and have

 

 

limescale or faulty.

it repaired if necessary.

 

 

The tap is turned off.

Turn the tap on.

The cycle indicator for the se

The filter (where present) in the

Clean the filter in the threaded

threaded hose fitting on the

hose fitting.

lected dishwashing cycle is

tap is blocked.

 

 

 

flashing:

 

 

 

Cancel the dishwashing cycle

the control indicator

is

 

 

 

 

(see chapter: Starting a dish

lit,

 

 

 

 

 

 

washing cycle),

fault code Å 10 is displayed

Filters in the base of the wash

clean filters (see chapter:

in the multidisplay

 

ing compartment are blocked.

 

Cleaning the filters),

(Problems with water inlet).

 

 

 

 

then start the dishwashing cy

 

 

 

 

 

 

 

 

cle again.

 

 

Water inflow hose

 

 

 

has not been correctly posi

Check the position of the hose.

 

 

tioned.

 

 

The cycle indicator for the se

The sink outlet is blocked.

Clean out sink outlet.

lected dishwashing cycle is

 

 

 

flashing,

 

Water drain hose

 

 

fault code Å 20 is displayed

 

Check the position of the hose.

in the multidisplay

 

has not been correctly posi

 

tioned.

 

 

(there is water in the dish

 

 

 

 

 

washer’s internal dispenser).

 

 

 

 

 

 

 

 

 

 

 

 

First shut off the water tap,

Fault code Å 30 is displayed

The antilood system has been

then switch off the appliance

in the multidisplay.

 

triggered.

 

and contact the Customer Care

 

 

 

 

Department.

The control indicator

is lit.

The door of the dishwasher is

Close the dishwasher door.

open.

 

 

 

The indicator

is there to re

 

 

 

mind you to check the dish

 

 

 

washer’s filters occasionally

The indicator goes out auto

The control indicator

is lit.

and to clean them, if necessary.

matically at the start of the

 

 

It lights up at regular intervals,

next dishwashing cycle.

 

 

regardless of how clean the fil

 

 

 

ters are.

 

 

 

 

The mains plug is not

Plug in the mains plug.

 

 

plugged in.

 

 

 

 

 

 

 

A fuse in the house’s wiring

Replace the fuse.

The cycle is not starting.

 

system is defective.

 

 

 

 

For dishwasher models with a

If the dishes are to be washed

 

 

delay start timer:

 

immediately, cancel the delay

 

 

A start time has been selected.

start.

 

 

 

 

 

Page 34
Image 34
Electrolux 60870 Water tap is blocked with, Hose fitting, Tap is blocked Flashing, Control indicator, Lit Washing cycle