40Installing the dishwasher
Installing the dishwasher
•The dishwasher must be installed on a firm floor and adjusted to ensure that it is stable and level in all directions.
•To compensate for unevenness in the floor and to match the height of the ap pliance to that of surrounding units, extend the threaded feet using a screw driver.
•The drain hose, inlet hose and mains cable must be laid so that they are able to move freely within the plinth area, and so that they are not kinked or crushed when the dishwasher is in position.
Free
1If the dishwasher is installed directly next to a cooker, a heatulating, non flammable panel (laminated with aluminium foil on the side next to the cooker) must be fitted flush with the top edge of the work surface (depth 57.5 cm).
If the appliance is builtr a kitchen
work surface, the worktop supplied with the dishwasher can be removed in the fol lowing way:
1.Unscrew the screws from the elbows at the rear (1).
2.Push the appliance’s worktop backwards
about 1 cm (2).
3. Lift the worktop at the front (3) and re move it.
1If the dishwasher is later used as a freeg appliance, the work surface supplied with it must be red.
