10Prior to using for the first time
Setting electronically:
1.Press the ON/OFF button.
3If the only LED indicator illuminated is one that belongs to a programme button, this means that this dishwashing cycle has been activated. The dishwashing cycle must be deselected:
Press function buttons 1 and 2 simultaneously for approx. 2 seconds.
The LED indicators of all the programme buttons that can be selected light up.
2.Press function buttons 1 and 2 simultaneously and keep them pressed. The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 1.
The LED indicator for function button 1 will flash. The multiy will indicate the hardness setting.
4.Pressing function button 1 increases the hardness setting by 1. (Exception: hardness setting 1 follows hardness setting 10).
5.When the hardness setting is correct, press the ON/OFF button. The hardness setting is now saved.
If the water softener is set electronically to “1”, this switches off the control in dicator for special salt.
|
| Water hardness |
| Adjusting the hardness setting | Indication on | ||
in °d1) | in mmol/l2) | Range | Manual | Electronic | the multidis | ||
play | |||||||
51 | 70 | 9,0 ,5 |
|
| 103) | 10L . | |
43 |
| 7,6 |
|
| 9 | 9L | |
37 |
| 6,5 | IV |
| 8 | 8L | |
29 |
| 5,1 |
| 2* | 7 | 7L | |
23 |
| 4,0 |
|
| 6 | 6L | |
19 |
| 3,3 | III |
| 5* | 5L | |
15 |
| 2,6 |
| 4 | 4L | ||
|
|
| |||||
11 | 14 | 1,9 | II |
| 3 | 3L | |
4 0 |
| 0,7 | I/II | 1 | 2 | 2L | |
|
|
|
|
|
| ||
|
|
|
|
| 1 |
| |
below 4 | below 0.7 | I |
| no salt | 1L | ||
|
|
|
|
| necessary |
| |
|
|
|
|
|
|
| |
1)(°d) German degree, measure of the hardness of water
2)[mmol/l] millimol per litre, international unit for water hardness
3)On this setting the length of the dishwashing cycle may be slightly longer. *) factory setting
