What to do if… 33
What to do if…
Remedying small malfunctions
Before you call the Customer Care Department, please check whether
–you cannot remedy the fault yourself with the help of the following fault table
or
–whether it is caused by faulty, electrical connections and/or faulty water con nections.
In these cases the engineer must make you liable for the costs of the Customer Service intervention even during the warranty period.
If one of the following fault codes is displayed in the multidisplay during oper ation:
–Fault codeÅ 10 (Problems with water inlet),
–Fault codeÅ 20 (Problems with water drainage), please have a look at the following table.
When the fault is remedied, press the button for the cycle that has started. The cycle will continue.
With other fault codes (“Å ” followed by a number):
–Abort the dishwashing cycle.
–Switch the appliance off and on again.
–Reashing cycle.
If the fault is displayed again, please contact the Customer Care Department and inform them of the fault code.
