28In daily use
Starting a dishwashing cycle
1.Check that the spray arms can turn freely.
2.Turn the water tap on fully.
3.Close the door.
4.Press the ON/OFF button.
5.Select the desired cycle.
The cycle indicator and the respective cycle stages in the cycle progress display will be illuminated. The remaining time expected for the cycle will be shown in the multiy.
The selected cycle will begin after approximately 3 seconds.
The current stage of the cycle is always shown in the cycle progress display.
3During the dishwashing cycle, the remaining time shown in the multi may be adjusted according to the size of the load, degree of soiling, etc.
Interrupting or aborting a dishwashing cycle
Only interrupt a dishwashing cycle that is in progress if it is absolutely necessary.
Interrupting the dishwashing programme by opening the dishwasher door
1Hot steam may escape when the door is opened. There is a risk of scalding.
1.Open the door carefully. The dishwashing cycle will stop.
2.Close the door. The cycle will continue.
Aborting the dishwashing cycle
1.Press function buttons 1 and 2 and keep them pressed.
The LED indicators of all the programme buttons that can be selected light up.
2.Release the function buttons. The dishwashing cycle has been cancelled.
3.If you want to start a new cycle, check whether there is any detergent in the dis penser.
4.Switch off using the ON/OFF button.
3Turning off the dishwasher will only interrupt a selected dishwashing cycle, not cancel it. The cycle will recommence after turning the dishwasher back on again.
