Connecting the dishwasher | 41 |
|
|
Connecting the dishwasher
Connecting to the water supply
•The dishwasher can be connected to cold and hot water supplies up to max. 60 °C.
•The dishwasher must not be connected to open hot water appliances or in stantaneous water heaters.
Permitted water pressure
Lowest permitted water pressure: | Consult your plumber if the water pressure is | |
0,1 MPa ( = 1 bar = 10 N/cm2 ) | less than 0,1 MPa. | |
Highest permitted water pressure: | If the water pressure is greater than | |
1 MPa, a pressure reduction valve must be used | ||
1 MPa ( = 10 bar = 100 N/cm2 ) | ||
| (available from your dealer). |
Connecting the inlet hose
1The water inlet hose must not be kinked, crushed or entangled when it is being connected.
Connect the threaded hose fitting (ISO 2281:2000) on the water inlet hose to a tap with an external thread (¾ inch). The inlet hose is fitted with either a plastic or a metal nut:
–Only tighten the nut hand tight.
Then do a visual check for water tightness. (Make sure that the tap is not drip ping.)
3So that access to the tap in the kitchen is not restricted by the use of the dish washer, we recommend installing an additional tap, or fitting a Tbranch to the existing tap.
1WARNING! erous voltage
(This does apply to dishwashers with safety valve).
The electrical cable for the safety valve is in the doublelled water inlet hose and is live.
Therefore do not immerse the water inlet hose or the safety valve in water.
