Stereo / Bilingual Sound Selection
When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the Sound Selection button.
Audio Signal
Mode Indicator
STEREO
MAIN I
SUB II
MONO
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of | Regular broadcast | Regular + NICAM MONO I | NICAM | NICAM DUAL MONO |
broadcast | (Standard Audio) | (MAIN I ) | STEREO | (MAIN I / SUB II ) |
Mode Indicator No Indicator 
I 
II
A2 (German) .......Used in Australia, Malaysia etc.
Type of
broadcast
Mode Indicator
Regular broadcast | BILINGUAL or DUAL MONO: | STEREO | |
(Standard Audio) | MAIN I / SUB II | ||
|
No Indicator 
•If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching occurs, it is recommended you switch from STEREO to MONO.
•Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
•When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using the Sound Selection button.
•DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
Technical Information
60
