EverFocus eDR1680 Series operating instructions Optional Connection

Page 11

Optional Connection

VGA Monitor

Connect the VGA monitor output connector to a VGA monitor. The VGA monitor displays selected live or recorded cameras in any available format.

Call Monitor

Connect the Call monitor output connector to a TV monitor. This monitor displays the full screen images of cameras associated with alarms or images from the installed cameras sequentially.

Alarm In

Connect Alarm In 1-16 to NC or NO type of alarm signals. Please make sure to setup the software configurations of Alarm In accordingly.

Alarm Out

Connect Alarm Out 1,2,5,6 to NC type of alarm signals, Alarm Out 3,4,7,8 to NO type.

Microphone/Speaker

Connect the microphone/speaker or other audio devices to the Audio In/Audio out connector.

PTZ Camera

Connect a PTZ camera to the RS-232 (Com#2) connector at system start up.

Ethernet

The system is enabled control from the PC via Ethernet. Connect the LAN connector to a standard RJ45 connector Ethernet cable. Shown in below is an example of the connection. .

Modem ( Modem Function Reserved)

The system is enabled control from the PC via modem. Connect the RS 232 Connector (Com#1) to a modem. Shown in below is an example of the connection.

ISDN

The system is enabled control from the PC via ISDN. Connect the ISDN TA device to the RS

232connector (Com#1).

Disk Array

It is allowed to connect additional hard disk array (EDA400) for extensional storage.

11

Image 11

Contents Administrator’s Guide Operating Instructions Safety Precautions AC100~240V Power Cords Important Safeguards Table of Contents Product Features Front Panel Part NamesCooling Fan USB Connector ReservedMain Monitor VGA Output VGA connector Back PanelFunction Buttons Remote ControllerPower Button ID ButtonsCameras InstallationPower Basic ConnectionOptional Connection Function Keys Illustration General mode operationGeneral mode PTZ control mode Page Enter PTZ mode operationLive Display and Basic Operation System LoginLive Display ƒ Multi-window display ƒ Display Camera Setupƒ Sequence Display Mode ƒ Clean Message / Alarm ResetSetup Menu Menu flowchart Camera General Camera Setup Camera-General Setup Motion Camera-Advanced SetupTime Type Sensitivity Motion Detection Setup Mask TypeDetection Area Setting Mask SelectBuzzer Alarm OutputNetwork Alarm Post-RecordingDuration VLoss Act video loss actionCamera-Global Setup Month Calendar SetupDayType Config YearSystem Setup System-General Setup HDD Full Action System-Hard Disk SetupHDDs Auto Overwrite Normal Status System-Alarm Input SetupAlarm Input Alarm ActionFocus Camera Gateway System-Network SetupIP address SubmaskDial Out System-Dial-up SetupDialup Device DialSend Mail to System-Email SetupSystem Address Dwell Time Display Setup Display-Main Monitor Seq SetupSEQ Mode Total PagesDisplay-Call Monitor Seq Setup Level Password SetupName / Password / Confirm Logout Video Playback Playback and Search recorded imagesSearch by Location Search Recorded ImagesSearch by Time Operation Smart Search Operation Search by EventVideo Archive Video Archive and PreviewPreview Archived Video Event Log PTZ Control View from Internet / Intranet Basic Operations and Login DisplayMain Screen Page Search Function Panel Search Mode showing Page To adjust Focus Appendix a Specifications413.4 350.7 318.6 Appendix B Recording Time TableSystem storage GB 160 826.7 701.5 637.1 Unit Hour system storage GB 320Appendix C Simulated Keyboard Appendix D Q & a Japan Office Head OfficeUSA Office European Office