EverFocus eDR1680 Series ƒ Multi-window display, ƒ Display Camera Setup, ƒ Sequence Display Mode

There is always a focus window surrounded by a white frame and it can be moved among split

windows by using buttons.

ƒFull/Zoom Switch the focus window to full screen mode. Press again to Digital Zoom-in (X2) the selected area (Show X2 at the right lower corner on the display). Press again to return to previous

static display. On Full screen display, you may also press to return to previous static display.

ƒMulti-window display

Press

to change display different split windows according to following cycle.

ƒDisplay Camera Setup

Move the focus to the desired view window, press “CH Set” button and the camera selection Dialog

will appear on the screen. Press or turn the Jog to select desired camera then press “Enter” button to confirm setting. Press “Exit” button to leave the dialog.

Note: Each channel is allowed only to show at once. It is not able to appear same camera in different windows in the same split display.

ƒSequence Display Mode

Press “SEQ” button to toggle between Sequence and Static Display Mode.Sequence can be displayed in various split windows. Press the Sequence Display Mode, user may view the Status and control the Alarm Outputs. The other function keys will be disabled until it’s switched back to Static Display Mode.

ƒStatus Display

There are four types of status display on the bottom of the screen. Press to display Date/Time & HDD storage status, Date/Time & Camera Status, Date/Time & Alarm Inputs, Date/Time & Alarm Outputs accordingly.

Date/Time & HDD storage status

Date/Time & Camera Status

(Green=Recording, Grey=Not Recording, White=Uninstall, Yellow=Motion, Red=Video Loss)

Date/Time & Alarm Inputs

(Green=Normal, Red=Alarm triggered, White=Alarm In setting off)

Date/Time & Alarm Outputs

(Green= Alarm out setting ON. White= Alarm out setting OFF)

ƒClean Message / Alarm Reset

When the alarm is activated, press any button first time to clean the alarm message.

16