6. 5 Display Setup
6.5.1 Display-Main Monitor Seq Setup
The Main Monitor Sequence Configuration allows administrator to define the Display Pages in Sequence Mode display.
SEQ Mode
There are 7 Sequence Mode display types – Full,
Total Pages
Select the desired total page number from the list. Maximum page numbers for each SEQ Mode:Full Window: 16 pages,
Dwell Time
Select the Dwell Time (1 ~ 99 Sec) for each selected page. Default value is “5” seconds.
Current Page
The total page number is varied by the above items. Select the desired page, and the selected page will be shown in the view window below.
The display camera can be defined from the view window. Use | buttons or “Shuttle” to move | |
focus to the view window. |
|
|
While the focus is in the view window: Use | or “Jog” to move between display. Press “CH Set” | |
to set the corresponding window as desired channel if necessary (Please refer details of CH Set in Chapter 4.1). Press “Exit” to leave the view window and back to the previous item.
33