6.4.5 System-Dial-up Setup
The Dial-up Setup allows the administrator to define the parameters for dial-up connection between the system and outboard devices through Modem (Modem Function Reserved) or ISDN. .
For ISDN only
Dialup Device
The system supports dial-up connection via Modem or ISDN. Select Modem or ISDN to setup the dial-up method. Select None to disable dial-up function. Default value is “Modem”. Setup the dial-in details below as needed.
Dial In
Users can dial in to the system for remote operation through the selected dial-up method. Enter the proper dial in details as required in the Dial in column. Users may use the default Local IP 192.168.0.1 and Remote IP 192.168.0.2 or set desired virtual IP.
Dial Out
The system can automatically dial out through the selected dial-up method and connect to ISP if there’s an event that needs to be delivered. Enter the proper dial out details as required in the Dial out column.
After finished necessary input, move the focus to “Confirm” icon. Press “Enter” to confirm previous setting to activate network function.