E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
¾Call Monitor: This field is to set the sequence for the call monitor output.
Dwell Time: This field represents the rate at which the cameras will sequence on the call monitor. The dwell time for the auto sequence can be set from 0 to 99 seconds. To change this, simply use the arrow keys on the DVR which also represent the channel
Operation: This field is to select from camera 1 to 4 for the sequence screen. The default is set to CH1. To change this, simply use the arrow keys on the DVR which also represent the channel
o Please Note: If an alarm occurs call monitor will display that particular camera automatically.
: Press | or | to move the cursor to the left or right. |
:Press or to change the value.
These keys are located at the top left row of keys (same keys as channel
31