E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
Simple One to One Connection
Cat 5
Crossover Ethernet Cable Pin outs:
The Diagram below shows the pin configurations for a cross over cable.
Diagram 31
Connection Procedure:
¾The First step is to purchase or make a cross over cable. We recommend purchasing one if you have never made a cross over cable. Please remember you can not use a straight through network cable for this application
¾Once you have a cross over cable plug one end into the LAN port on the back of the recorder and the other into the network card on the back of the computer.
¾Now Log into the Everfocus DVR menu and using the jog dial from the previous chapter go to the Network Setting Menu. (See page 28 for more instructions)
60