E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
¾Use the up and down arrow keys to select alarm list and press the enter key.
Please Note: If the alarm list is empty it is because there are no alarms or motion being recorded.
¾Diagram 25 illustrates what the alarm list may look like. Use the up and down arrow keys to choose a segment you want to playback and press the enter key. This in turn will start playing the segment you chose.
Diagram 25
¾To stop playing back press the stop key.
3.Date/Time Playback
¾Assuming you have completed the setup options in Chapter 1 through 4. If you are in Record mode hit the stop button to stop recording.
¾If the menu pops up when you press the stop button. This usually means you have either the DVR is in Timer record or Motion record. Log into the DVR menu by pressing the Menu button. Go to Either Timer Setting Menu or Motion Record Setting menu and turn them off.
¾Once you have stopped any type of recording on the DVR you are ready to do playback.
¾Press the search button to enter the search menu. (See Diagram 26)
48