E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
Diagram 20
¾To stop recording simply press the Stop button.
Please Note: When the Hard Drive is full, the DVR will either stop recording automatically or overwrite from the beginning of the hard drive. This is all dependent on what was set in the normal record setting (see page 19).
Alarm Recording Setup
¾Assuming you have completed the setup options in Chapter 1 and 2. Log into the DVR menu by pressing the Menu button.
Turning the jog dial clockwise or counter clockwise will allow you to scroll through the different menu setup option pages.
¾Once You Reach the Alarm Record Setting Menu (See Page 21) change the Recording speed and quality that best fits your application.
Please Note: See Appendix B to find the appropriate speed to fit your recording needs.
¾Exit the menu by pressing the Menu button. Once you have exited the menu if an alarm occurs the DVR will go into record mode.
¾To view the operating display (diagram 21), press the Display button.
43