Motorola QIP6200/QIP64xx manual Connecting Hdtv Video Only, Component Video YPbPr, Ieee

Page 31

QIP6200/QIP64xx User Guide

Connecting HDTV – Video Only

If you have a TV with a DVI connector, you will need an HDMI adapter cable or an HDMI adapter. If your TV has a DVI port, you can plug a DVI cable directly from the TV to the HDMI adapter on the set-top. Or, you can use an HDMI adapter cable to connect the units port-to-port. (HDMI adapters and HDMI adapter cables can be purchased at your local electronics retail store.)

Determine which of the following connections best suits your home entertainment equipment configuration and then follow those steps:

Component Video (YPbPr)

1Connect an RF coaxial cable to the service provider’s wall outlet and to the RF IN connector on the set-top.

2Connect the component video cables to the Y, Pb, and Pr connectors on the HDTV and set-top.

The component video outputs (YPbPr) transmit only video. If you use component video, refer to “Connecting Your Set-Top to an HDTV – Audio Only” to connect the audio. To connect your home sound system for audio, see “Connecting Your Set-Top to an A/V Receiver –Audio Only.”

IEEE 1394

If your HDTV has an IEEE 1394 connector, you can use the IEEE 1394 for both your video and audio connection:

Connect an IEEE 1394 cable to the IEEE 1394 connector on your HDTV and the set-top.

On-screen graphics are not displayed when you use the IEEE 1394 connection on the set-top.

25

Image 31
Contents User Guide Repairs Important Safety Instructions Declaration of Conformity Regulatory InformationCanadian Compliance Software License Software LicenseContact Us QIP6200/QIP64xx User Guide ContentsConnecting a Stereo TV and Stereo VCR Connecting a Stereo TVConnecting an A/V Receiver, TV, and VCR Introduction Item Description QIP6200/64xx Front and Back PanelsFront Panel Description Front PanelQIP6200/QIP64xx User Guide Program not supported by all program guides EnabledBack Panel Description Back PanelDescription Electronic Program Guide Turning Power On and OffAdjusting the Volume Changing ChannelsDigital Video Recorder DVR QIP64XX Models only What is DVR?Simultaneously Record Shows and Watch a Recorded Program Simultaneously Record Two ShowsOptimizing Your SET-TOP for HIGH-DEFINITION TV This screen appears if the Hdmi port is active To exit the menu and save your settings, press the Power or Setting Description User SettingsHDMI/YPbPr Closed Restore ALL ON-SCREEN Graphics Connecting Your SET-TOP Important Safety Considerations Video Sdtv Video Connection OptionsComponent video YPbPr Hdtv and Sdtv Hdmi or Ieee 1394 Digital Hdtv and SdtvHdtv only RF Output SdtvIf You Have FollowRecording Your Connections QIP6200/QIP64xx User Guide Connecting Your SET-TOP to AN Hdtv Video only Component Video YPbPr Connecting Hdtv Video OnlyIeee DVI or Hdmi Connecting Your SET-TOP to AN Hdtv Audio only Connecting Hdtv Audio Only Connecting Your SET-TOP to AN A/V Receiver Audio only Connecting an A/V Receiver Audio Only Connecting Your SET-TOP to a Stereo TV Connecting a Stereo TV QIP6xxx Series Connecting Your SET-TOP to a Stereo TV and Stereo VCRConnecting a Stereo TV and Stereo VCR Connecting Your SET-TOP to AN A/V RECEIVER, TV, and VCR Connecting an A/V Receiver, TV, and VCR Data Devices Data FeaturesDoes not work TroubleshootingProblem Possible Solution Power onFrom the center When viewingThere is no audio ChannelsOn the TV screen There is no videoProgram guides There are noGraphics, closed Captions, orSides of the picture Bars aboveBelow the picture Bars on all fourSet-top is making a humming noise Video is horizontally distorted on the Hdtv screenMgbi