Motorola QIP6200/QIP64xx manual DVI or Hdmi

Page 32

DVI or HDMI

If your TV has a DVI or HDMI input, use the set-top’s HDMI connection for your video using the appropriate interface cable or adapter.

Remember, if your TV has a DVI input, you will need to connect audio as well. Refer to “Connecting Your Set-Top to an HDTV – Audio Only” after you complete the appropriate step below.

If your TV has an HDMI input, the video and audio connections are made with a single cable between the TV and the set-top.

•Connect an HDMI cable to the HDMI connector on the set-top and to the HDMI connector on your TV (no separate audio connections are required since the HDMI interface supplies both audio and video); or

•Connect one end of an HDMI adaptor cable* to the HDMI connector on the set-top and the other end of the adaptor cable to the DVI- HDTV connector on your TV; or

•Connect a DVI cable to the DVI-HDTV connector on your TV and to the HDMI adapter* that you attached to the HDMI connector on the set-top.

For information on configuring the set-top settings, see “Optimizing Your Set-Top for High-Definition TV.”

*Both the HDMI adapter and the HDMI adapter cable include a DVI interface which allows your DVI HDTV to be attached to the HDMI port.

26

Image 32

Contents User Guide Repairs Important Safety Instructions Canadian Compliance Regulatory InformationDeclaration of Conformity Software License Software LicenseContact Us Contents QIP6200/QIP64xx User GuideConnecting an A/V Receiver, TV, and VCR Connecting a Stereo TVConnecting a Stereo TV and Stereo VCR Introduction QIP6200/64xx Front and Back Panels Front Panel DescriptionFront Panel Item DescriptionQIP6200/QIP64xx User Guide Enabled Back Panel DescriptionBack Panel Program not supported by all program guidesDescription Turning Power On and Off Adjusting the VolumeChanging Channels Electronic Program GuideWhat is DVR? Digital Video Recorder DVR QIP64XX Models onlySimultaneously Record Two Shows Simultaneously Record Shows and Watch a Recorded ProgramOptimizing Your SET-TOP for HIGH-DEFINITION TV This screen appears if the Hdmi port is active To exit the menu and save your settings, press the Power or HDMI/YPbPr User SettingsSetting Description Closed Restore ALL ON-SCREEN Graphics Connecting Your SET-TOP Important Safety Considerations Video Connection Options Component video YPbPr Hdtv and SdtvHdmi or Ieee 1394 Digital Hdtv and Sdtv Video SdtvRF Output Sdtv If You HaveFollow Hdtv onlyRecording Your Connections QIP6200/QIP64xx User Guide Connecting Your SET-TOP to AN Hdtv Video only Ieee Connecting Hdtv Video OnlyComponent Video YPbPr DVI or Hdmi Connecting Your SET-TOP to AN Hdtv Audio only Connecting Hdtv Audio Only Connecting Your SET-TOP to AN A/V Receiver Audio only Connecting an A/V Receiver Audio Only Connecting Your SET-TOP to a Stereo TV Connecting a Stereo TV Connecting Your SET-TOP to a Stereo TV and Stereo VCR QIP6xxx SeriesConnecting a Stereo TV and Stereo VCR Connecting Your SET-TOP to AN A/V RECEIVER, TV, and VCR Connecting an A/V Receiver, TV, and VCR Data Features Data DevicesTroubleshooting Problem Possible SolutionPower on Does not workWhen viewing There is no audioChannels From the centerThere is no video On the TV screenThere are no Graphics, closedCaptions, or Program guidesBars above Below the pictureBars on all four Sides of the pictureVideo is horizontally distorted on the Hdtv screen Set-top is making a humming noiseMgbi