Motorola DCT3400 Series manual SettingDescription, TV Type, HDMI/YPbPr, Output

Page 15

DCT3400 User Guide

Use your remote control or the cursor keys on the front panel to navigate the on-screen display:

Press the ▲ and ▼ keys to highlight the setting you wish to change.

Press the key to select an option.

To exit the setting and move to another setting, use the ▲ and ▼ keys.

If the User Settings menu does not display on the HDTV screen, the TV may not support the default video output setting. Use the front panel LED to adjust the settings as described in “There is no video on the TV screen” in “Troubleshooting.”

For a TV with an HDMI connection, be sure the TV is on and connected to the DCT3400 HDMI OUT connector before adjusting the settings.

The User Settings menu options are:

SettingDescription

TV Type

Sets the aspect ratio. The front panel display indicates the

 

type you select. Defaults to 16:9. Options are 16:9 for wide

 

screen TVs or 4:3 LETTERBOX or 4:3 PAN/SCAN for

 

standard TVs:

 

4:3 LETTERBOX fits widescreen programming on the

 

screen by placing black bars at the top and bottom.

 

4:3 PAN/SCAN fills the screen by cropping the left and

 

right edges of widescreen programming.

HDMI/YPbPr

Sets the video display format for the HDMI or component

Output

video outputs. The front panel display indicates the format

 

you select. Defaults to 1080i. Options are 1080i, 720p, 480p,

 

or 480i. For HDMI only, additional options you can use to

 

display video on a computer monitor are PC1-VGA

 

(640x480) and PC2-XVGA (800x600).

 

Some TVs only support certain display formats. Check your

 

TV user manual for more information.

 

If you are not using the HDMI connection, the HDMI/YPbPr

 

OUTPUT setting displays as YPbPr OUTPUT.

9

Image 15
Contents User Guide Risk of Electric Shock Important Safety Instructions Regulatory Information Declaration of ConformityCanadian Compliance You may Software LicenseContact Us DCT3400 User Guide ContentsRecording Your Connections Data Devices Troubleshooting Introduction Front Panel Back Panel Interactive Program Guide Turning Power On and OffAdjusting the Volume Changing ChannelsDigital Video Recorder DVR Optimizing Your Cable Terminal for High Definition TV Closed Caption DisabledOutput SettingDescriptionTV Type HDMI/YPbPrDescription SettingSetting Description ON-SCREEN Graphics Connecting Your Cable Terminal Video Connection Options N T I L a T E Important Safety ConsiderationsHdtv Connecting to AN Hdtv Video onlyConnecting Hdtv Video Only Component video Y Pb PrIeee Connecting to AN Hdtv Audio only Connecting Hdtv Audio Only Audio Spdif audio Optical Spdif Connection Connecting to AN A/V Receiver Audio onlyConnecting an A/V Receiver Audio Only Connecting to a Stereo TV Connecting a Stereo TV Connecting to a Stereo TV and Stereo VCR Connecting a Stereo TV and Stereo VCR DCT3400 Connecting to AN A/V RECEIVER, TV, and VCRConnecting an A/V Receiver, TV, and VCR DCT3400 Recording Your ConnectionsData Devices Problem Possible Solution TroubleshootingFrom the center When viewing cableThere is no audio ChannelsNo graphics or HDMI/YPbPr Output settingThere is no video On the TV screenPicture There are blackBars to the right LeftHumming noise Bars on all fourSides of the picture Is making aMgbi