DCT3400 User Guide
Connecting HDTV – Video Only
1Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the cable terminal.
2Connect the HDTV using component video, HDMI, or IEEE 1394.
Component video (Y Pb Pr)
Connect the component video cables to the Y, Pb, and Pr connectors on your cable terminal and the HDTV.
This connection carries video only. To connect the audio connections for your HDTV, refer to the following page. To connect your audio connections for a home theater receiver, refer to “Connecting To an A/V Receiver – Audio Only.”
HDMI
If your HDTV has a HDMI input, connect an HDMI cable less than 20 meters long to the HDMI OUT connector on your HDTV and the DCT3400.
If you use the TV as the primary audio source or your home theater receiver has an HDMI input and output, the HDMI connection carries video and audio.
If your TV has a DVI input, you can use an
For information on configuring your DCT3400 settings, see “Optimizing Your Cable Terminal for High Definition TV.”
IEEE 1394
If your HDTV has an IEEE 1394 connector, you can connect an IEEE 1394 cable to the IEEE 1394 connector on your HDTV and the cable terminal.
If you use the TV as the primary audio source, the IEEE 1394 connection carries video and audio.
If you use the IEEE 1394 connection,
17