2. 4 External Storage
2. 4. 1 Using USB memory device
Insert the memory device into the USB port. The system automatically recognizes the device.
2. 4. 2 Connecting
Connect and power each USB device before powering the DVR.
2.4. 3 Connecting IEEE1394 (FireWire) devices
Connect and power each device before powering the DVR.
FireWire devices appear in
HDD Management as type 1394
2.5 Connecting to LAN or Internet
2. 5. 1 Making physical connection
Connect the LAN port of the DVR to an available 10/100
2. 5. 2 Automatic network configuration
The DVR can automatically obtain and configure the network interface via DHCP. Refer to page 19.
2. 5. 3 Manually configure network
The DVR may be manually configured by assigning an IP address, subnet mask, gateway DNS. Refer to page 19.
Note
Up to 20 FireWire devices may be connected in series.
9