SVAT Electronics CLEARVU9 instruction manual Now you can see

SVAT ELECTRONICS

now you can see

6.The firmware will be saved to the DVR and a status bar will let you know the progress.

7.When the firmware is completely installed, you will be asked to restart the system. Press OK. After restarting, the new changes will take effect.

FACTORY DEFAULT: The DVR can be restored to factory default by clicking the PRESS button and then pressing OK when the warning window pops up.

NOTE: Restoring to factory default will OVERRIDE all current settings (except date and time).

All recording schedules, USER IDs and alarm settings will be lost.

SYSTEM DATA: System settings can be saved to a USB drive. These settings can be reloaded in the case of accidental changes to settings or for transferring your settings to another CLEARVU9. All information and settings are saved except for the system name and

network settings.

TIP: Once you have set up your DVR, gone through the instruction manual and are satisfied with your settings, we suggest you back up your system data to a USB drive. This way, if you accidentally change a setting or are experiencing problems with

!current settings, you can always refer back to your initial settings.

CLEARVU9 46