User’s Manual
3.5.2Schedule Setup
The Schedule Setup is used to set the day and night time, or weekend recording schedule. Select <Schedule Setup> from the Record Setup Menu and press ENTER; the following menu is displayed.
|
| Schedule Setup |
1. | Day Time Start | AM 06:00 |
2. | Day Time End | PM 18:00 |
3. | Night Time Start | PM 18:00 |
4. | Night Time End | AM 06:00 |
5. Weekend Schedule | YES | |
6. Weekend Start | Fri 18:00 | |
7. Weekend End | Mon 06:00 | |
•Make appropriate changes of the start time of Day and Night Time using Direction keys.
•Press ENTER to confirm the settings or ESC to cancel.
•If you want to have a weekend record, choose <YES> to enable the <Weekend Schedule> in advance and then set <Weekend Start> / <Weekend End>.
•Press ESC to back to previous page.
3.5.3Preset Record Configuration
The <Preset Config> is used to select the preset recording quality and frame rate. In normal circumstances, we strongly suggest you set the item to <Standard>, the default. Below table shows the PPS and picture size under <Standard> in
Normal PPS |
| Normal Size | Event PPS |
| Event Size | ||
7.5 NTSC |
| 18 KB |
| 30 NTSC |
| 30 KB |
|
(6.25 PAL) |
|
| (25 PAL) |
|
| ||
|
|
|
|
|
| ||
20