Optiview DVR user manual Erase Disc, Dome Control, Dome Connection

User’s Manual

Make sure that you have an external storage device, such as a USB Hard Drive or USB ThumbDrive, available and connected to the appropriate port for export.

For more information on verifying digital signature, see Appendix D: Verifying Digital Signature.

4.5.4Erase Disc

This function is used to remove information found on a CD-RW or DVD+RW disk prior to exporting new information to the drive. Select <YES> and press ENTER to start deleting data.

4.6Dome Control

Versatile MPEG-4 DVR allows user to control a dome camera by the front panel.

In Live mode, press CHANNEL key to display the desired dome camera in full view. To enter Dome Control mode, press the DOME key and press channel key 2 to display the hint screen; to exit the Dome Control mode and back to live mode, press ESC or DOME.

To configure the dome controls settings, see the following sections.

4.6.1Dome Connection

Follow the steps to install dome camera.

•See section 2.4 Rear Panel Connections for RS-485 port pin definition.

•Refer to the following figure. Connect the R+, R- terminals on the dome camera to the D+, D- terminals on the RS-485 port by RS-485 cable respectively.

31