Optiview DVR user manual Per Camera Configuration, Basic Operation, Viewing Live / Playback Video

User’s Manual

3.5.4Per Camera Configuration

This function is used to set the Day / Night / Weekend PPS (Picture per Second) and Quality for each channel. The Preset Configuration must be set to <OFF> for accessing these schedules. The menu is displayed as below (Record Mode: 720×240@60PPS in NTSC / 720×288@50PPS in PAL).

	Per Camera Config
Cameral Select			CH1
	Day	Night	Weekend
Normal PPS	7.5	7.5	7.5
Normal Qlty	Mid	Mid	Mid
Event Max PPS	30	30	30
Event Qlty	Best	Best	Best
Event Acti	Both	Both	Both

•Firstly, select a wanted Camera for setting its record configuration. The image and recording settings of the selected camera will be displayed on the screen.

•Move the cursor using Direction keys and press ENTER to select an item.

•Change the value using UP / DOWN keys.

•Press ENTER to confirm the settings or ESC to abort.

•Press ESC to return to <Record Setup> Menu.

Please note that the total normal pps for all channels cannot exceed 120 NTSC (360×240@60PPS) / 100 PAL (360×288@50PPS) . To increase one channel’s pps, you may have to reduce the others’ first. Event pps is not restricted to this rule, since a smart event scheduler will handle to the total pps with a correct weighting.

4.Basic Operation

The Versatile MPEG-4 DVR allows user to access some general operations through the front panel easily. The following sections introduce the general operations of the unit.

4.1Viewing Live / Playback Video

The general functions can be accessed in both live and playback modes are described in the following sections.

21