Optiview DVR user manual Call Monitor Control

User’s Manual

The four windows on the top-left play back the recorded video of channel 1 to channel 4, respectively, and the rest windows display the live image of channel 1 to channel 4.

4.2Call Monitor Control

Users are allowed to use the Versatile MPEG-4 DVR unit front panel to control a call monitor display without having to access the Main Menu. Two viewing modes, including Sequence display and Single camera display, can be performed through the call monitor. To program the call monitor sequence, see section 5.5 Sequence Setup.

Follow the steps to control your call monitor.

•Press the CALL key on the front panel to enter call monitor control mode, the message “Call Mode” will be shown on the bottom-left corner of the screen.

Press 1-8 Key To Select Channel

Press SEQ To Enable Sequence

Call Mode

•Press CHANNEL key to display the associated camera on call monitor.

•Alternatively, press SEQ repeatedly to display the sequence of cameras previously programmed in <Call Monitor Schedule> Menu.

•Press ESC to return to Main monitor control mode.

25