Approach Tech DVR-3024M, DVR-3024MD manual Recording Operations, Manual Recording, Timer Recording

Page 17

3.2 Recording Operations

This section details the way to record video into hard-disk drives. Before commencing with the recording function, please configure the recording setting properly according to your needs.

3.2.1 Manual Recording

Take the following steps to start and stop recording:

(1)Press the REC button 6 to record video into a hard disk drive with the corresponding programmed recording settings. The REC

button 6 will light up indicating the DVR is in the recording status.

(2)Press the REC button 6 for 3 seconds to stop recording any time.

(3)To access just recorded video, please refer to section 3.4 for more details.

3.2.2 Timer Recording

Timer recording provides 2 periods of time each day in a weekly table which programs the DVR to turn on and off at specified times. This way the DVR will start/ stop recording according to the programmed schedule.

 

MAIN MENU

 

 

TIMER/ SEQ/ TITLE

 

RECORD

CLOCK

: SET

 

ALARM / MOTION

DAYLIGHT SAVING

: OFF

 

 

 

REC ENABLE

: OFF

 

TIMER/ SEQ/ TITLE

 

 

 

TIMER

:

SET

 

 

COMMUNICATION

 

 

SEQUENCER

: SET

 

DISK

 

TITLE

: SET

 

SYSTEM

 

 

 

 

 

 

 

GOTO CLOCK/ TIMER PAGE

 

 

MAIN PAGE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REC SCHEDULE

START END START END

S00:00- 00:00 00:00- 00:00

M00:00- 00:00 00:00- 00:00 T 00:00- 00:00 00:00- 00:00 W 00:00- 00:00 00:00- 00:00

T 00:00- 00:00 00:00- 00:00

F00:00- 00:00 00:00- 00:00 S 00:00- 00:00 00:00- 00:00

OK CANCEL

TO MOVE TO CHANGE

(1) Press the Setup button 9 to enter the

MAIN MENU.

15

(2) Select the CLOCK / TIMER and press the Enter button 15 to enter the CLOCK / TIMER page.

(3)Select the TIMER－SET.

(4)Press the Enter button 15 to enter the REC SCHEDULE table.

(5)You can set up by using the “<” button 11 and the “>” button 14 to locate the specific day/hour/minute and use the “^” button 12

and the “v” button 13 to set the day/hour/minute you wish.

You can also set up by using the Shuttle

Ring and the Jog Dial.

is the equal of

the “<” button 11 ,

 

is the equal of the

“>” button

14 ,

is

the equal of the “^”

button

12

and

is

the

equal of the “v”

button

13 .

 

 

 

 

The time is displayed in a 24-hour clock format.

(6)After scheduling is completed, press the Enter button 15 and set OK to save the setting or select CANCEL to leave the page without saving.

(7)To activate/ deactivate the programmed recording schedule, set the REC ENABLE to ON/ OFF. As the scheduled recording is

on, the red indicator of the Timer Record 17 will be on as well.

MAIN MENU

RECORD

ALARM / MOTION

TIMER/ SEQ/ TITLE

COMMUNICATION

DISK

SYSTEM

GOTO CLOCK/ TIMER PAGE

TIMER/ SEQ/ TITLE

CLOCK

: SET

DAYLIGHT SAVING

: OFF

REC ENABLE

: ON

TIMER

: SET

SEQUENCER

: SET

TITLE

: SET

 

 

MAIN PAGE

 

 

 

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Installation Page Safety Precautions Contents Product Introduction Product FeaturesIntroduction For CD-ROM Model For Removable HDD Model Front / Rear ViewFront View DVR-3024MD Disk Indicator Rec IndicatorUp / Down CH4 / CH3 buttons Enter / Quad buttonMobile Rack Power LED Power IndicatorShuttle Ring Jog DialRear View Alarm OUT, Disk FULL, RecordAbove figure is the rear view Alarm In / OutConnecting with 1 to 4 Cameras InstallationBasic Connection Attaching AN External Device to DVRLocation Jumper Hard-disk Drive InstallationWD800BB B. Compatible hard-disk drives01- 01-2005 System Information and Channel SelectionSystem information Quality Best Ntsc Rate 6HRUpdating System Software Mode Key Result Display Live Quad Record CH1CH2 CH3 CH4Operations Configuring Recording SettingsRecord Setting Recording Operations Timer RecordingManual Recording Main MenuMotion Alarm / Motion RecordingExternally Triggered Recording Normal Playback Playback OperationsFast Forward/Backward Slow Forward/ReversePlay back Picture-by-picture Picture in Picture PinP Display ModeSearch Operations Alarm List SearchFull List Search Time SearchClicking the Play button Thumbnail SearchThumbnail CD Menu for CD-ROM Model only SD Card SearchCD Menu Rack HD Backup Operations for more Backup Menu for HARD-DISK Model onlySave Backup OperationsCD Rewritable unit Backup Operations for CD-ROM Model only Then set HD 2 Usage to Backup Mobile Rack HD Backup OperationsSet HD 2 to Backup first. Take the following steps Archive Single image Clips into an SD Card SD Card Backup OperationsSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG Archive video of AVI clips into an SD cardSave the whole setting into the SD card Backup the System setting info into an SD cardTransfer the system setting info of DVR to another Key Lock OperationREC Setting Menu SetupREC Setting KEY FunctionsAlarm / Motion Setting PRE- Alarm Timer / SEQ / Title SettingMotion Setting ALM DurationDaylight Saving TIMER/ SEQ/ Title Clock SETREC Enable NET Enable Communication SettingComm ID NET DhcpDisk Setting HD FAT32 System SettingSD File Operation LOGSituation OSD LanguageMenu Backgnd MAC 00 0C 0C 00 E1 A0 Bios Date Sep 10 Cable Connections Network ConfigurationNetwork Network Configure Your DVR Network SettingsHttp Port MaskGateway Connection 3 TCP/IP Communication SetupProperties to enter the Local Area Select Internet Protocol TCP/IP Control PanelNetwork.Connections Local Area Connection Click Start Command Programs Connection TestingTriplex 4 CH DVR Viewer Software Introduction Software installationShort introduction Message C\Program Files\ Viewer【Multiscreen Buttons】：You can Operation Remote ControlProgram introduction 【 Available Devices 】： Here the whole Remote play and PTZ control Scroll the Original Image Size fromRemind the condition of recording Remote play Change Pan/Tilt/Zoom Setting【Edit AVI】： 【Backup up to AVI】：【Backup to JPG】： Web Page Viewer Channel Number To chooseMicrosoft Internet Explorer Connecting the DVRBrowsing images from the DVR Change Record / Alarm SettingChange Timer Record Setting 1 RS232 & RS485 Setup RS-232 & RS-485 Setup & ProtocolGeneral Command Format MiscellaneousDEC HEX Non REC Mode REC ModeRequest State Second Category=0x06 Description of System StateBuilt-in hard disk Hard Disk InstallationMobile Rack for Removable HDD Model Pull the active-handle D Message Meanings O.S.D MessageHD1 Time Index Table12-02-03 01-30-04 3000 Indexes 2999 02-03-04 02-08-04 Point stops recording Previously recorded data remainingModel Number DVR-3024M DVR-3024MD SpecificationsScanIP Page For CD-RW Model only Appendix 1. Using CD DiscsInserting Disc Ejecting The DiscRMN0400040v1.0

DVR-3024M, DVR-3024MD specifications

The Approach Tech DVR-3024M and DVR-3024MD are advanced digital video recorders designed for professional security surveillance systems. These models embody cutting-edge technology, delivering superior performance and reliability for both residential and commercial applications.

The DVR-3024M features 24-channel recording capabilities, allowing users to monitor multiple locations simultaneously. This model supports a variety of camera types, including analog and IP cameras, making it a versatile choice for diverse security setups. The DVR-3024MD enhances this functionality by incorporating additional features tailored for more demanding environments, such as support for higher resolution cameras and enhanced data management.

One of the standout features of both models is their real-time recording capability at 1080p resolution. This ensures that users capture high-quality video footage with clarity, making it easier to identify individuals and details in crucial situations. The systems also support H.264 video compression technology, which optimizes storage space without compromising video quality. This is particularly beneficial for users with extensive recording needs, as it allows longer retention of footage without requiring excessive storage resources.

The Approach Tech DVRs are equipped with an intuitive user interface, enabling easy navigation through menus and settings. Users can access live feeds, playback footage, and manage settings seamlessly via a connected monitor or remotely through web browsers and mobile apps. This remote access feature is crucial for users who require constant surveillance, providing peace of mind regardless of location.

In terms of connectivity, the DVR-3024M and DVR-3024MD come with multiple encoding options and can stream video over networks, allowing users to monitor their premises from anywhere in the world. They support power over Ethernet (PoE), simplifying installation by reducing the need for additional power sources for cameras.

Both models also feature advanced motion detection, enabling automatic recording only when action is detected. This not only conserves storage space but also makes it easier to locate significant footage during playback. Alerts and notifications can be customized to keep users informed about any unusual activity.

In summary, the Approach Tech DVR-3024M and DVR-3024MD stand out as reliable and feature-rich options for anyone looking to implement a sophisticated surveillance system. With superior recording capabilities, user-friendly interfaces, and advanced connectivity options, these models are well-equipped to meet the needs of modern security demands.
Top Page Image Contents