Approach Tech DVR-3024M, DVR-3024MD manual Appendix 1. Using CD Discs, For CD-RW Model only

Page 66

APPENDIX 1. – Using CD Discs

(FOR CD-RW MODEL ONLY)

Please note that when using CD-ROM, CD-R or CD-RW discs, do not write or stick anything on the surface as this could cause an error in recording or the data on the disc may be damaged.

Inserting Disc

1.Please press the eject button.

2.Please place the disc in the tray.

NOTE: When using a 12 cm disc, please place it in the center of the caddy where you are able to see the larger position specifically for the 12 cm disc. When using an 8 cm disc, please place it in the center of the caddy where you can see the position for the 8 cm disc. Please place the printed side up. Never place two discs in the caddy at the same time.

3.Please do not touch the surface of the disc where it has been recorded.

4.To insert the caddy please press the insert / eject button and hold the caddy lightly at the middle of its front and push gently to insert.

Ejecting The Disc

1.Press the eject button.

2.Carefully lift out the disc.

3.Press the eject button, or lightly touch the center of the tray and the tray will automatically reenter its position within the CD - RW recorder.

Caution: After the tray has been ejected and the disc has been retrieved from the caddy or put in the caddy, insert the tray in its original position to avoid the accumulation of dust or miscellaneous items inside the caddy, which may affect the pick up head when it needs to remain clean for effective reading of the data.

Emergency Eject Button

The device has an emergency eject button which allows for manual retrieval of the disc in case the machine needs repair, or there is a cut in the power supply. In the above circumstances use the following method to eject the disc.

1.The power supply has been cut.

2.Press the emergency eject button with a needle ( a paper clip, etc. can also be used ) and the tray will immediately eject.

64

Image 66
Contents Installation Page Safety Precautions Contents Product Features IntroductionProduct Introduction Front / Rear View Front View DVR-3024MDFor CD-ROM Model For Removable HDD Model Up / Down CH4 / CH3 buttons Rec IndicatorDisk Indicator Enter / Quad buttonShuttle Ring Power IndicatorMobile Rack Power LED Jog DialAlarm OUT, Disk FULL, Record Rear ViewAlarm In / Out Above figure is the rear viewBasic Connection InstallationConnecting with 1 to 4 Cameras Attaching AN External Device to DVRHard-disk Drive Installation Location JumperB. Compatible hard-disk drives WD800BBSystem information System Information and Channel Selection01- 01-2005 Quality Best Ntsc Rate 6HRCH2 CH3 Mode Key Result Display Live Quad Record CH1Updating System Software CH4Configuring Recording Settings Record SettingOperations Manual Recording Timer RecordingRecording Operations Main MenuAlarm / Motion Recording MotionExternally Triggered Recording Fast Forward/Backward Playback OperationsNormal Playback Slow Forward/ReversePicture in Picture PinP Display Mode Play back Picture-by-pictureFull List Search Alarm List SearchSearch Operations Time SearchThumbnail Search ThumbnailClicking the Play button SD Card Search CD MenuCD Menu for CD-ROM Model only Backup Menu for HARD-DISK Model only Rack HD Backup Operations for moreBackup Operations CD Rewritable unit Backup Operations for CD-ROM Model onlySave Mobile Rack HD Backup Operations Set HD 2 to Backup first. Take the following stepsThen set HD 2 Usage to Backup Save to F0000.JPG Save to F0001.JPG Save to F000N.JPG SD Card Backup OperationsArchive Single image Clips into an SD Card Archive video of AVI clips into an SD cardTransfer the system setting info of DVR to another Backup the System setting info into an SD cardSave the whole setting into the SD card Key Lock OperationREC Setting Menu SetupREC Setting KEY FunctionsAlarm / Motion Setting Motion Setting Timer / SEQ / Title SettingPRE- Alarm ALM DurationTIMER/ SEQ/ Title Clock SET REC EnableDaylight Saving Comm ID Communication SettingNET Enable NET DhcpDisk Setting SD File System SettingHD FAT32 Operation LOGOSD Language Menu BackgndSituation MAC 00 0C 0C 00 E1 A0 Bios Date Sep 10 Network Configuration NetworkCable Connections Configure Your DVR Network Settings NetworkMask GatewayHttp Port 3 TCP/IP Communication Setup Properties to enter the Local AreaConnection Control Panel Network.Connections Local Area ConnectionSelect Internet Protocol TCP/IP Connection Testing Click Start Command ProgramsSoftware installation Triplex 4 CH DVR Viewer Software IntroductionMessage C\Program Files\ Viewer Short introductionOperation Remote Control Program introduction 【 Available Devices 】: Here the whole【Multiscreen Buttons】:You can Scroll the Original Image Size from Remind the condition of recordingRemote play and PTZ control Change Pan/Tilt/Zoom Setting Remote play【Backup up to AVI】: 【Backup to JPG】:【Edit AVI】: Channel Number To choose Web Page ViewerConnecting the DVR Microsoft Internet ExplorerChange Record / Alarm Setting Browsing images from the DVRChange Timer Record Setting General Command Format RS-232 & RS-485 Setup & Protocol1 RS232 & RS485 Setup MiscellaneousDEC HEX Request State Second Category=0x06 REC ModeNon REC Mode Description of System StateHard Disk Installation Built-in hard diskMobile Rack for Removable HDD Model Pull the active-handle O.S.D Message D Message Meanings12-02-03 01-30-04 3000 Indexes 2999 02-03-04 02-08-04 Time Index TableHD1 Point stops recording Previously recorded data remaining Specifications Model Number DVR-3024M DVR-3024MDScanIP Page Inserting Disc Appendix 1. Using CD DiscsFor CD-RW Model only Ejecting The DiscRMN0400040v1.0