Approach Tech DVR-3024M, DVR-3024MD manual Updating System Software, CH2 CH3, CH4

Page 15

Mode

Key

Result Display

Live /

Quad

 

Record

(

)

 

CH1/

( Single channel )

 

CH2/

 

 

CH3/

 

 

CH4

 

 

Seq./

 

 

Save

then loop back

Playback

Quad

 

 

(

)

 

CH1/

( Single channel )

 

CH2/

 

 

CH3/

 

 

CH4

 

2.4 Updating System Software

Please take the following steps to safely update it.

1.Turn off the DVR.

2.Insert the SD card into the built-in SD slot of the unit.

3.Hold down the Up 12 and Down 13 buttons simultaneously, and then turn on the unit.

4.Keep holding down the buttons until the DVR sounds a tone and displays the message “ XXXXXX BYTES READ”. Now the DVR is updating the system software, which will take approximately 90 seconds to process.

5.Restart the unit when the device sounds a tone twice and displays the message “PLEASE RESTART”. The process is complete.

(If you have already followed the procedures 1~5, and the unit is still unable to switch on, please first check if the SD card you are using is functioning and the file is intact. And then start procedures 1

~5 all over again.)

6.Verify the version of the system software. (Please refer to the section 4.6 VERSION option.)

!Caution:

1.Before carrying out the updating procedures, please ensure the SD card is working and the file of the system software is intact.

2.Don’t interrupt the process while the unit is updating itself, as this would cause the unit to hang on.

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Installation Page Safety Precautions Contents Product Features IntroductionProduct Introduction Front / Rear View Front View DVR-3024MDFor CD-ROM Model For Removable HDD Model Enter / Quad button Rec IndicatorDisk Indicator Up / Down CH4 / CH3 buttonsJog Dial Power IndicatorMobile Rack Power LED Shuttle RingRear View Alarm OUT, Disk FULL, RecordAbove figure is the rear view Alarm In / OutAttaching AN External Device to DVR InstallationConnecting with 1 to 4 Cameras Basic ConnectionLocation Jumper Hard-disk Drive InstallationWD800BB B. Compatible hard-disk drivesQuality Best Ntsc Rate 6HR System Information and Channel Selection01- 01-2005 System informationCH4 Mode Key Result Display Live Quad Record CH1Updating System Software CH2 CH3Configuring Recording Settings Record SettingOperations Main Menu Timer RecordingRecording Operations Manual RecordingMotion Alarm / Motion RecordingExternally Triggered Recording Slow Forward/Reverse Playback OperationsNormal Playback Fast Forward/BackwardPlay back Picture-by-picture Picture in Picture PinP Display ModeTime Search Alarm List SearchSearch Operations Full List SearchThumbnail Search ThumbnailClicking the Play button SD Card Search CD MenuCD Menu for CD-ROM Model only Rack HD Backup Operations for more Backup Menu for HARD-DISK Model onlyBackup Operations CD Rewritable unit Backup Operations for CD-ROM Model onlySave Mobile Rack HD Backup Operations Set HD 2 to Backup first. Take the following stepsThen set HD 2 Usage to Backup Archive video of AVI clips into an SD card SD Card Backup OperationsArchive Single image Clips into an SD Card Save to F0000.JPG Save to F0001.JPG Save to F000N.JPGKey Lock Operation Backup the System setting info into an SD cardSave the whole setting into the SD card Transfer the system setting info of DVR to anotherKEY Functions Menu SetupREC Setting REC SettingAlarm / Motion Setting ALM Duration Timer / SEQ / Title SettingPRE- Alarm Motion SettingTIMER/ SEQ/ Title Clock SET REC EnableDaylight Saving NET Dhcp Communication SettingNET Enable Comm IDDisk Setting Operation LOG System SettingHD FAT32 SD FileOSD Language Menu BackgndSituation MAC 00 0C 0C 00 E1 A0 Bios Date Sep 10 Network Configuration NetworkCable Connections Network Configure Your DVR Network SettingsMask GatewayHttp Port 3 TCP/IP Communication Setup Properties to enter the Local AreaConnection Control Panel Network.Connections Local Area ConnectionSelect Internet Protocol TCP/IP Click Start Command Programs Connection TestingTriplex 4 CH DVR Viewer Software Introduction Software installationShort introduction Message C\Program Files\ ViewerOperation Remote Control Program introduction 【 Available Devices 】： Here the whole【Multiscreen Buttons】：You can Scroll the Original Image Size from Remind the condition of recordingRemote play and PTZ control Remote play Change Pan/Tilt/Zoom Setting【Backup up to AVI】： 【Backup to JPG】：【Edit AVI】： Web Page Viewer Channel Number To chooseMicrosoft Internet Explorer Connecting the DVRBrowsing images from the DVR Change Record / Alarm SettingChange Timer Record Setting Miscellaneous RS-232 & RS-485 Setup & Protocol1 RS232 & RS485 Setup General Command FormatDEC HEX Description of System State REC ModeNon REC Mode Request State Second Category=0x06Built-in hard disk Hard Disk InstallationMobile Rack for Removable HDD Model Pull the active-handle D Message Meanings O.S.D MessagePoint stops recording Previously recorded data remaining Time Index TableHD1 12-02-03 01-30-04 3000 Indexes 2999 02-03-04 02-08-04Model Number DVR-3024M DVR-3024MD SpecificationsScanIP Page Ejecting The Disc Appendix 1. Using CD DiscsFor CD-RW Model only Inserting DiscRMN0400040v1.0

DVR-3024M, DVR-3024MD specifications

The Approach Tech DVR-3024M and DVR-3024MD are advanced digital video recorders designed for professional security surveillance systems. These models embody cutting-edge technology, delivering superior performance and reliability for both residential and commercial applications.

The DVR-3024M features 24-channel recording capabilities, allowing users to monitor multiple locations simultaneously. This model supports a variety of camera types, including analog and IP cameras, making it a versatile choice for diverse security setups. The DVR-3024MD enhances this functionality by incorporating additional features tailored for more demanding environments, such as support for higher resolution cameras and enhanced data management.

One of the standout features of both models is their real-time recording capability at 1080p resolution. This ensures that users capture high-quality video footage with clarity, making it easier to identify individuals and details in crucial situations. The systems also support H.264 video compression technology, which optimizes storage space without compromising video quality. This is particularly beneficial for users with extensive recording needs, as it allows longer retention of footage without requiring excessive storage resources.

The Approach Tech DVRs are equipped with an intuitive user interface, enabling easy navigation through menus and settings. Users can access live feeds, playback footage, and manage settings seamlessly via a connected monitor or remotely through web browsers and mobile apps. This remote access feature is crucial for users who require constant surveillance, providing peace of mind regardless of location.

In terms of connectivity, the DVR-3024M and DVR-3024MD come with multiple encoding options and can stream video over networks, allowing users to monitor their premises from anywhere in the world. They support power over Ethernet (PoE), simplifying installation by reducing the need for additional power sources for cameras.

Both models also feature advanced motion detection, enabling automatic recording only when action is detected. This not only conserves storage space but also makes it easier to locate significant footage during playback. Alerts and notifications can be customized to keep users informed about any unusual activity.

In summary, the Approach Tech DVR-3024M and DVR-3024MD stand out as reliable and feature-rich options for anyone looking to implement a sophisticated surveillance system. With superior recording capabilities, user-friendly interfaces, and advanced connectivity options, these models are well-equipped to meet the needs of modern security demands.
Top Page Image Contents