ALARM
1. ALARM ENABLE
Alarm will be triggered by event occurrence when the setting is YES.
2. ALARM DURATION
Set the reaction time which was determined by how long the alarm mode responded to a buzzer. Default setting is 10 sec. Options are 10 Sec, 15 Sec, 20 Sec, 30 Sec, 1 MIN, 2 MIN, 3 MIN, 5 MIN, 10 MIN, 15 MIN, 30 MIN, ALWAYS, AUTO.
NOTE : 1. Video loss, Alarm and Motion messages is shown like the Alarm Duration time is.
2.When the setting is AUTO, the alarm duration time is based on the setting of the external alarm device.
3.During ALARM DURATION’S setting time, users can restart ALARM/MOTION function by pressing both “ENTER” + “STOP” buttons.
3. REC IPS
Select the images per second of recording during an ALARM. The options are as following: NTSC－30、15、8、4、2、1 PAL－25、12、6、3、2、1
4. QUALITY
There are four quality settings during an alarm.
ALARM : BASIC, BEST, HIGH, NORMAL.
(ALARM)
ALARM ENABLE | YES |
ALARM DURATION | 15 MIN |
RECORD IPS | 30 |
QUALITY | NORMAL |
RECORD MODE |
5. RECORD MODE
There are three recording settings :
DWELL
1. NORM
(DWELL)
NORM ALARM
CAM1 01 01
CAM2 01 01
CAM3 01 01
CAM4 01 01
To set up the DWELL time period that each channel auto sequentially shows on call monitor. The level is from 1 to 15 Sec or OFF.
2. ALARM
To set up the DWELL time period when alarm input is triggered.
The level is from 1 to 15 Sec or OFF.
PIP
1. FULL SCREEN
To set up the full screen background picture display.
2. PIP SCREEN
To set up the picture with a 1/9 size screen “insert”.
3. POSITION
There are six position settings : D/L, D/M, D/R, U/L, U/M, U/R.
(PIP)
FULL SCREEN | CAM 1 |
PIP SCREEN | CAM 2 |
POSITION | D/R |
12