Figure
MOTION DETECTION SETUP
Figure
MOTION DETECTION SETTING — ROW SETUP
1
1
2
3
4
5
6
7
8
9
11
12
2
3
4
5
6
7
8
9 
10 
11 
12 
13 
14 
15 
16 
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
1
2
3
4
5
6
7
8
9
11
12
Figure
MOTION DETECTION
Figure
BACK TO MOTION DETECTION SETTING
1
1
2
3
4
5
6
7
8
9
11
12
2
3
4
5
6
7
8
9 
10 
11 
12 
13 
14 
15 
16 
1
1
2
3
4
5
6
7
8
9
11
12
2 
3 
4
5 
6 
7 
8 
9 
10 
11 
12 
13 
14 
15 
16 
6. MOTION RECORD
When the DET setting is “ON”, you can set up the MOTION RECORD function,
1.Select “ON” to set up the motion trigger recording: It can automatically switch to Record Mode. The motion
detection will change the scanning sequence and show 
on the monitor.
NOTE: The triggered recording time is based on ALARM DURATION mode setting (Please refer to page.12 for ALARM DURATION) and it will record from the last triggered time. For example, when the alarm duration setting is 1 min, the recording time is from 9:00:00 to 9:01:00. If the motion detection is trigged again at 9:00:40, the trigged recording time will be from 9:00:00 to 9:00:40 and 9:00:40 to 9:01:40. The total recording time is 00:01:40.
For example : If the motion is detected on Camera #1, its recording & scanning sequence will be more frequently. The sequence will be as 1st, 2nd, 1st, 3rd, 1st, … 4th. And channel 1 will show 
on the screen. If the motion detection of 2nd
camera and 3rd camera are both activated, they will be scanning as 2nd, 3rd, 1st, 2nd, 3rd, 4th, 2nd, 3rd, 1st, 2nd, 3rd,
4th … and vice versa. And CH2 & CH3 will show 
for a period of time which is just like the Alarm Duration time.
2.Select ”OFF”: The screen still shows 
and if it is in recording mode, the motion detection will change the scanning sequence.
14