Step7 : Connect to DVR via internet
1. Change PC network setting to the original setting and link PC to the internet.
2. Click twice and enter your User name, Password and host (Note : If you never change the “Account” before, the User Name and Password are both “admin”). Then click OK to connect.)
DDNS HOST
Note of Dynamic IP setting
*In step 2.7 : Some routers don’t support some DDNS HOST.
*In step 3.1 : Please use router’s LAN end to connect PC.
*In step 3.8 : Please use IE browser to enter router’s gateway.
*In step 4.1 : Please make sure that you have pressed save after you finish setting.
*In step 4.2 : Please make sure that you have pressed save after you finish setting.
*In step 4.3 : Please make sure that you have pressed add after you finish setting.
*In step 4.4 : Please make sure that you have pressed save after you finish setting.
*In step 6 : Please use router’s LAN end to connect to DVR. Use WAN end to connect to ADSL modem.
*In step 7 : The Server IP is the DDNS HOST which you set in step 4.4.
33