Maxtor HVR-04E manual Running OSD menu, Using menu

INSTALLATION AND CONNECTION HVR-04E

5. Running OSD menu

5.1. Using menu

Press the [MENU] button to open the OSD Configuration Menu.

(1) Main Menu

(2) Sub-menu

(3) Setting Page

(4) Help message

(1)Main Menu Tabs: The selected tab is shown in blue and the related sub-menus will be shown below the tab. To move to the previous/next Main Menu Tab, use the [◄◄ / ►►] arrow buttons. To move to a sub-menu, press the [ENTER] or [▼] buttons.

(2)Sub-menu: The selected sub-menu is shown in blue and the related setting page will be shown to the right of the sub-menu. Use the [▲/▼] arrow buttons to move within the sub-menu list. To move to the setting page press the [ENTER] button. To exit the setting page, press the [EXIT] button.

(3)Setting Page: The selected item is shown in gray. To move within each page, use the [◄◄ / ►►] or [▲/▼] arrow buttons. Press the [ENTER] button to change the value of a setting. When the setting value is a word, a dialogue box to edit the word will open. When setting value is a number, it should be set with using the [◄◄ / ►►] or [▲/▼] arrow buttons. After the value is set, press the [EXIT] button. To exit the Setting Page, press the [EXIT] button.

(4)Help message: Related information for each menu/setting will be displayed here.