INSTALLATION AND CONNECTION |
15.2. Configuring HVR-04E’s Network Information
The following description is on based on Ethernet connection. For more detailed information on the Network Settings Page, please refer to
(1)Press [MENU] button.
(2)Select “System” using the [◄◄ / ►►] buttons and press [ENTER].
(3)Select “Network” using the [▲/▼] buttons and press [ENTER].
(4)Select “IP Addr” using the [▲/▼] buttons and press [ENTER].
(5)Press [EXIT] button after entering IP address in the dialogue box.
(6)Select “Net Mask” using the [▲/▼] buttons and press [ENTER].
(7)Press [EXIT] button after entering Net Mask in the dialogue box.
(8)Select “Gateway” using the [▲/▼] buttons and press [ENTER].
(9)Press [EXIT] button after entering Gateway in the dialogue box.
(10)Select “DNS” using the [▲/▼] buttons and press [ENTER].
(11)Press [EXIT] button after entering DNS in the dialogue box.
(12)Press [EXIT] button to exit the page.
40 | 2003.05.21 (v 1.0) | Hunt Electronic USA, Inc. |