Maxtor HVR-04E manual Network Monitoring & Managing, Connecting Ethernet

INSTALLATION AND CONNECTION HVR-04E

(8)Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[R]” after formatting.

(9)Shut down “Disk Manager” by pressing [EXIT] button.

15. Network Monitoring & Managing

HVR-04E can be accessed, controlled, and managed from remote site via Internet/Intranet.

15.1. Connecting Ethernet

1)Turn off HVR-04E’s power switch.

2)Connect HVR-04E to hub with Ethernet cable.

3)Turn on HVR-04E’s power switch.

<Note>

1.Supply power to HVR-04E after connecting Ethernet cable to protect against electrical damage to HVR-04E.

2.Check cable connection status.

3.Check LED on HVR-04E’s rear panel after supplying power.