Customizing ProntoPro NG
4In the Device Overview, tap the Device for which you want to define the brand.
A message screen appears.
5Tap 
.
The ‘Brands’ screen appears.
Searching the brand
1Tap 
in the ‘Brands’ screen. The ‘Searching the Brand’ screen appears.
2Tap 
and point ProntoPro NG at the device.
The ‘Searching’ screen appears. ProntoPro NG searches through the list of brands, by sending out an IR code for each brand.
3When the device for which you are defining the brand, turns off,
tap 
in the ‘Searching’ screen. The ‘Installing the Brand’ screen appears.
4To install the brand and code set, follow the instructions described in ‘Installing the brand’ on page 21.
Learning Commands
If an IR code is not in the database, you can program ProntoPro NG commands by transmitting IR signals from your existing remote control to ProntoPro NG’s learning eye.
The Learn Tool allows you to learn a button or a device action. A device action is an action that is executed automatically when you select a device. E.g. when you select TV, your ProntoPro NG can learn to switch on the
TV at the same time. You can also use the 2 - 8 inches Learn Tool to relearn commands that do not
EN
work properly.
5 - 20 cm
Learning eye
Note Changing the Brand in the Brand Tool will not have an impact on the learned codes.
User Guide |
23 |