Philips TSU 7500 manual Selecting RF to Operate your Devices

Page 51

Using the Power Features

Selecting RF to Operate your Devices

1Tap and hold the ProntoPro NG icon in the upper left corner of the touch screen for 3 seconds. The Tools Menu appears.

2Tap in the Tools Menu. The ‘RF IR Tool’ screen appears.

3Tap .

The Device Overview appears.

4Tap the Device for which you want to select RF.

The ‘Select IR or RF’ screen appears. By default IR is selected in the Sending Signals list.

The Define RF button is disabled.

5Choose RF in the Sending Signals list. The Define RF button is enabled.

6Tap .

The ‘RF Settings’ screen appears.

7Select the RF Channel in the RF Channel list you use for the RF Extender.

The RF Channel on the RF Extender has to be the same as the RF Channel on ProntoPro NG.

8Select the Extender ID in the Extender ID list you use for the RF Extender.

The Extender ID on the RF Extender has to be the same as the Extender ID on ProntoPro NG.

Note You can use several RF Extenders with your ProntoPro NG. For each RF Extender you use for your devices, you need to set the RF Channel and the Extender ID.

The RF Channel is identical for all RF Extenders. The Extender ID is unique for each RF Extender.

9Tap in the ‘RF Settings’ screen. The RF settings are saved.

10Tap in the ‘Select IR or RF’ screen.

ProntoPro NG will send out RF signals for the selected device.

Note Try to keep ProntoPro NG and the RF Extender away from metal objects, as this will have a negative impact on the range.

User Guide

51

EN

Image 51

Contents ProntoPro Next Generation User Guide ProntoPro Next GenerationTable of Contents Table of Contents ProntoPro NG Home Theater Control Panel Taking a First LookDevice Taking a First LookUSB port Touch Screen Docking Station ProntoPro NG has a USB port to make downloading much easier What’s New for ProntoPro Next Generation?Before You Start Installing the Battery PackCharging the ProntoPro NG Cool down the battery pack Tilt ProntoPro NG more than 50 degrees default setting Getting StartedTurning on ProntoPro NG Setting Time and Date Changing the Time FormatChanging the Time Tools Menu Changing the DateTo change the day To change the monthSetting the Language To change the yearYou can change the language used on your ProntoPro NG Device Overview Operating ProntoPro NGOverview Using the Tools Customizing ProntoPro NG Defining the Brand for a DeviceSelecting the Brand and Code Set for your Device Tap ‘Code sets’ screen appears Installing the brandSelecting the brand Selecting the code setSearching the code set Searching the Brand and Code Set for your deviceTap and point ProntoPro NG at the device Searching the brand Learning CommandsLearning a Button Learning a Device ActionTap the button you want to learn Tap the Device for which you want to learn a Device Action Labeling ElementsYou can choose from four different character sets Labeling a ButtonFollow the instructions 6 to 8 of ‘Labeling a Button’ on Labeling a DeviceLabeling a Tap in the ‘Label Tool’ screen. The Page Overview appearsAdding a New Device Adding DevicesCopying an Existing Device Delete Tool allows you to delete a button or a device Deleting ElementsDeleting a Button Deleting a DeviceMoving Devices Adjusting the Settings Setting the Brightness of the Backlight Setting the Timeout of the LCD ScreenSelect First Settings Page appears Setting the Volume Level of the Touch Screen Setting the Volume LevelSetting the Navigation for ProntoPro NG Setting the Volume Level of the Hard ButtonsCalibrating the Touch Screen Setting the Animation ModeAdjusting the Firm Keys Settings Adjusting the Screen Activation SettingsAdjusting the Pickup Sensor Settings Adjusting the Cursor Keys SettingsUsing the Power Features Creating and Editing MacrosCreating a Macro To test the macro To add a delay to the action listTo add an action to the action list To add a beep to the action listDeleting an action from the action list Editing a MacroTo finish the macro Moving an action in the action listActivating Timers Creating and Editing TimersCreating and Editing Timers Adding a TimerDeleting a Timer Labeling a Timer Editing a Timer Setting the Start Time or Stop Time Setting the Start DateDefining the Start Action or Stop Action Defining the Repeat SettingsRepeat toggle Operating ProntoPro NG with the Cursor Is provided below the button NG’s touch screen To set the cursor navigation An RF Extender not included is therefore required Operating ProntoPro NG with RFSelecting RF to Operate your Devices Selecting IR to Operate your Devices Plug one end of the cable in the USB port on your computer With ProntoProEdit NG you canProntoProEdit NG Why don’t my buttons work properly? How do I reset ProntoPro NG?How do I calibrate the touch screen? Reset button ProntoPro NG shuts off automatically TroubleshootingGeneral Problems Devices do not respond to commands from ProntoPro NGConfiguration file is corrupted Customizing ProblemsButtons are not sending the correct commands ProntoPro NG will not learn commandsConnection to the PC Memory Storage ProblemsProntoPro NG error messages Timers do not workUpgrading ProntoPro NG Cleaning ProntoPro NGMaintaining ProntoPro NG Important NoticesList of Symbols List of Symbols List of Symbols Included SpecificationsAction GlossaryLCD USB Index LCD screen timeout, 33 Learn Tool, 23 learning Volume mute, 5 volume down, 5 volume level, 34 volume up