Customizing ProntoPro NG
Setting the Volume Level
You can set the volume level for the hard buttons as well as for the touch screen buttons. The volume of the button refers to the loudness of the beep you hear when you press or tap a button.
Setting the Volume Level of the Hard Buttons
To adjust the volume of the hard buttons, tap in the first
Settings Page.
You can either select 1 of the 3 volume levels or choose to mute. Every time you press, the volume level increases with one step up to level 3.
Setting the Volume Level of the Touch Screen
To adjust the volume level of the touch screen, tap in the first Settings Page.
You can either select 1 of the 3 volume levels or choose to mute. Every time you tap, the volume level increases with one step up to level 3.
Setting the Navigation for ProntoPro NG
The cursor is used by default to operate your devices. You then navigate the ProntoPro NG with the touch screen buttons. However, you can also set the cursor to browse through ProntoPro NG’s devices and pages. For more information on operating the ProntoPro NG with the cursor, see ‘Operating ProntoPro NG with the Cursor’ on page 48.
To set the navigation for the ProntoPro NG, tap in the second Settings Page:
■You can select Cursor
■You can select Cursor
User Guide |
34 |