Philips Wireless Equipment Box manual Remote Control

The Remote Control

3Tap the Learn tool.

The label Learn appears on the iPronto icon. The Device and Page tabs are disabled.

4For learning a soft button, select the soft button you want to learn in the XL view. The button is highlighted.

-or-

For learning a hard button, press the hard button you want to learn on the iPronto.

5Press and hold the button on the conventional RC. The conventional RC sends out an IR code.

If learning succeeds, the iPronto RC beeps and OK appears on the screen.

If learning does not succeed, the iPronto beeps and Failed appears on the screen.

Note When learning fails, try the following:

■Make sure you aim the IR sender of the conventional remote control to the iPronto’s learning eye;

■Make sure the distance between the iPronto and the conventional remote control is between 4 and 8 inches (10 and 20 centimeters);

■Make sure the batteries of the iPronto or of the conventional RC are not low;

■Avoid learning under bright fluorescent light or direct sunlight: it might affect the IR signals.

iPronto User Guide

40