Getting the iPronto Up and Running
■General: On this tab you adjust general settings and you can check your battery status and network signal strength. See Setting up Your iPronto on page 15.
■Wireless: On this tab you set the wireless network settings. You need to set these settings so the iPronto can be connected to your network and to the Internet. See Wireless Network Settings on page 21.
■Network: On this tab you set your Internet connection settings. See Internet Settings on page 23.
■About: On this tab you read information about licence terms and agreements. A button for downloading new software from the Internet is also located on this tab. If you tap the button, the iPronto will check if updates of your software are available. When there are updates available, you can download them from the Internet immediately.
Note While adjusting the System Settings, it is useful to operate the touch screen with the stylus. See The Touch Screen on page 27 for more information.
Setting up Your iPronto
After installing the Wireless LAN Adapter and the battery, you need to calibrate your touch screen and define the settings on your iPronto, such as time and date, brightness, time out and so on. These settings are necessary to make your iPronto function properly.
The first time you activate your iPronto, the System Settings will automatically appear on the screen. To access the System Settings later, follow this procedure:
1Press and hold the scroll wheel for 5 seconds. The page turns to its flipside.
2To exit the System Settings, press and hold the scroll wheel for 5 seconds. The page turns to its normal view.
15