Getting the iPronto Up and Running
Follow these steps to set your wireless network settings.
1Press and hold the scroll wheel for 5 seconds to display the System Settings.
2Select the Wireless tab in the System Settings.
3To change the default name of the Service Set Identifier, enter the new name in the Service Set Identifier text box.
To obtain information on this, consult your WAP manual or the WAP configuration on your PC.
4If encryption is enabled in your wireless network, select the correct encryption in the Wireless Network Encryption section:
■none;
■64 bit;
■128 bit.
To obtain information on this, consult your WAP manual or the WAP configuration on your PC.
5If encryption is enabled in your wireless network, enter your Encryption pass phrase in the Encryption pass phrase text box.
The Encryption key text box is automatically filled in.
iPronto User Guide
22