Setting the clock, Setting the RF out channel

STOP C-L

PLAY B-K

7.Move the selected channel with or

to the programme number you want to assign.

8.Confirm with FWD 1- B .

9.To assign other TV channels to a programme number, repeat steps 5 to 8.

10.To end, press STATUS/EXIT .

Setting the clock

If the display shows an incorrect time or '--:--', the time and date must be reset manually.

If a TV channel that transmits PDC or the FASTTEXT is stored under programme number 'P01', time/date will automatically be taken from the TXT/PDC information.

(SMART CLOCK)

1.Switch on the TV. If required, select the pro- gramme number for the video recorder.

2.Press MENU . The main menu will appear.

3.Select 'INITIAL SET UP' with PLAY B-Kor STOP C-Land confirm with FWD 1- B .

4.Select 'CLOCK' with PLAY B-Kor STOP C-Land confirm with FWD 1- B .

TIME --:--

DATE --/--/--

SMART CLOCK [ON]

END=EXIT

5.Check the time in 'TIME'. If required, please change the time with 0..9 .

6.Check 'DAY', 'MONTH' and 'YEAR' in the same way.

7.Choose 'SMART CLOCK' ON or OFF with

FWD 1- B .

8.To end, press STATUS/EXIT .

Time/date is displayed incorrectly despite manual setting

With Smart Clock, time/date is taken from the TV channel saved on 'P01'.

If you wish to switch this automatic time cor- rection off, select 'OFF' for Smart Clock.

You can reactivate this function at anytime by selecting 'ON' for Smart Clock.

Setting the RF out channel

In some reception locations it is possible that a TV channel will be sent on the same or similar frequency as the video recorder.

Result: As soon as the video recorder is switched on, the reception quality for this or sev- eral other TV channels will decrease.

The following steps will show you how to change the pre-set 'transmission' (RF out channel) fre- quency on the video recorder.

What is RF out channel?

This electronic component in the video recorder allows the device to transmit audio and video signals via the aerial cable. These signals can be received on a TV just like TV channels.

What is RF out channel frequency?

This frequency or channel indicates the channel on which the audio or video signal is transmitted.

1.Switch on the TV. If required, select the pro- gramme number for the video recorder.

2.Press MENU . The main menu will appear.

3.Select 'INITIAL SET UP' with

PLAY B-K

and confirm with

STOP C-L

FWD 1- B

4.Select 'RF OUT' with

PLAY B-K

STOP C-L

and confirm with

FWD 1- B

SELECT K L CHOOSE B

→RF OUT CH

END=EXIT

5.Press

FWD 1- B

6.Press

to select a

PLAY B-K

STOP C-L

0..9

free (not allocated) channel between channel

22 and 69 in your area.

7.Press

FWD 1- B

If you cannot get an interference-free picture and sound, connect the video recorder and the TV with a scart cable. Then, switch the built-in modulator off.

Press STOP C-Lrepeatedly until '--' appears next to 'RF OUT CH' on the TV screen. Then confirm with FWD 1- B .

8.To end, press STATUS/EXIT .

11	EN