Philips VR750/07, VR752/07 Programming a recording with, Error message Err, Error message FUL

PLAY B-K

Programming a recording with

'TURBO TIMER'

With Turbo Timer, programming a recording that takes place within the next 24 hours is quick and easy. You don’t even need to switch your TV 'on' as the necessary information will appear in the VCR display. (the figures below are only shown as examples)

Error message: 'Err'

If this error message appears after pressing TURBO TIMER , the start time or end time is same as another recording.

5.Insert a cassette with an intact security tab (unprotected).

6.Switch off with

STANDBY/ON y .

The programmed

1.Press TURBO TIMER . 'StA' will briefly appear in the video recorder display. After 2 sec- onds, start time will appear (default setting is current time). Set the time you want to start recording using

PWR.

PWR.

PWR.

STOP C-L .

recording will only function when the video recorder is switched off with STANDBY/ON y .

Error message: 'FUL'

•If this error message appears after pressing TURBO TIMER , then all TIMER blocks are

already programmed. No more recordings can be programmed. If you want to clear or check a programmed recording (TIMER block), select the programme number on 'TIMER LIST' menu and then press CLEAR .

Press		TURBO TIMER			.
2.						PWR.
'End' will briefly appear
in the video recorder
display. After 2 sec-
						PWR.
onds, the end time will
appear (default setting
is same as the start
time). Set the time you						PWR.
want to finish recording
using				or			.
	PLAY B-K				STOP C-L
3.Press					.
		TURBO TIMER				PWR.
'Pro' will briefly appear
in the video recorder
display. After 2 sec-
onds, default program						PWR.
number will appear in
the display. Set the
desired program num-
						PWR.
ber using					or
			PLAY B-K

STOP C-L .

4.Press TURBO TIMER .

The program number you have just set will be displayed.

19 EN