Problems and solutions for programmed recordings
Error message: ' ' flashes in the video recorder display
• No cassette was inserted. Insert a cassette and switch off the video recorder using
STANDBY/ON y .
Cassette was ejected as soon as the button was pressed
•A cassette without the security tab was insert- ed. Undo the erase protection (chapter 'Manual recording', section 'Preventing acci- dental erasing') or insert a different cassette.
'TURN OFF VCR FOR TIMER RECORDING' flashes on the TV screen
•The video recorder is switched on several min- utes before the start of a programmed record- ing. Switch off the video recorder with STANDBY/ON y . A programmed recording (timer) will only function when the video recorder is switched off.
Cassette is ejected during recording
•The end of the tape was reached during recording.
The video recorder does not react
•While a programmed recording is being made, you cannot operate your video recorder manu- ally. If you want to cancel the programmed recording, press STOP/EJECT on the front panel.
How to check, or delete a programmed recording (TIMER)
1.Switch on the TV. If required, select the pro- gramme number for the video recorder.
2.Press MENU . The main menu will appear.
3.Select 'TIMER' with PLAY
4.Select 'TIMER LIST' with PLAY
SELECT K L CHOOSE B
ONCE
DAILY WEEKLY
→TIMER LIST
END=EXIT
5.Select timer block with FWD 1- B .
Timer block disappeared when I pressed
FWD 1- B .
You have checked all the programmed record- ings. If you want to check them again, repeat steps 2 to 5.
6.To cancel the recording, press CLEAR .
7.To end, press | STATUS/EXIT . |
8.Switch off with | STANDBY/ON y . |
How to change a programmed recording (TIMER)
1.Switch on the TV. If required, select the pro- gramme number for the video recorder.
2.Press MENU . The main menu will appear.
3.Select 'TIMER' with PLAY
Then press .
4.Select 'ONCE', 'DAILY' or 'WEEKLY' record- ing with PLAY
.
5.Select a TIMER block with . (The flashing number indicates an empty TIMER block.)
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
6.Press | CLEAR |
| to delete information and input | |||||
|
| |||||||
correct information with | 0..9 | . | ||||||
7.To end, press |
|
|
| . |
| |||
| STATUS/EXIT | |||||||
8.Switch off with |
|
|
|
|
| . | ||
| STANDBY/ON y |
20 | EN |
|