1. Connecting the video recorder
Important for the United Kingdom
This apparatus is fitted with an approved mould- ed 10 Amp plug. To change a fuse in this type of plug proceed as follows:
1.Remove fuse cover and fuse.
2.Fix new fuse which should be a BS1362 3A,ASTA or BSI approved type.
3.Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 3A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 3A.
The severed plug must be destroyed to avoid a possible shock hazard, or should it be inserted into a 13A socket elsewhere.
How to connect a plug:
The wires in the mains lead are coloured in accordance with the following code:
BLUE- 'NEUTRAL' ('N')
BROWN- 'LIVE' ('L')
4.The BLUE wire must be connected to the ter- minal which is marked with the letter 'N' or coloured BLACK.
5.The BROWN wire must be connected to the terminal which is marked with the letter 'L' or coloured RED.
6.Do not connect either wires to the earth ter- minal in the plug which is marked with the let-
ter 'E' or by the safety earth symbol 
or coloured green or
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the
Preparing the remote control for operation
The remote control and its batteries are packed separately in the original video recorder packag- ing. You must install the batteries in the remote control before use.
1.Take the remote control and the enclosed batteries (2 batteries).
2.Open the remote control’s battery compart- ment and place the batteries in it as shown in the picture and close the battery compart- ment.
The remote control is now ready to use. Its range is approximately 7 metres.
Connecting your video recorder to the TV
The necessary cable connections must be made before you can record or playback TV pro- grammes using your
video recorder.
We recommend that you use a scart cable to con- nect your TV and video recorder.
What is a scart cable?
The scart or Euro AV cable serves as the uni- versal connector for picture, sound and control signals. With this type of connection, there is practically no loss of quality during the picture or sound transfer.
•You can have the
4 | EN |
|