E-IDE (ATAPI) Connection Set Up

Connecting the CRW2200E

This section describes how to connect the CRW2200E by E-IDE (ATAPI) to a tower type computer.

In this description, about some parts that is duplicated with the part of “Connecting the CRW2200S” in “SCSI Connection Set Up” ( →P. 14 – 31), see the reference page described here.

Note

The way of removing the casing or panel, or installing built-in devices may differ from your computer. Be sure to follow the procedures in the documentation that came with your computer.

Opening the Computer

1Shut down your computer and unplug it from the AC outlet. (→P. 14 step 1)

2Remove all attached cables and peripheral devices and the outer casing of the computer. If you need to remove screws in the process, make sure you don’t lose them. Remove the cover and front panel of the computer. (→P. 14 step 2)

3Touch a metal part of the computer’s chassis or power supply unit to discharge any static electricity from your body. Or, wear an anti-static grounding wrist strap.

(→P. 15 step 3)

37